Fusion Tack Glue 3.38oz
A$21.00
SuperTite's Fusion Tack is an industrial strength textile adhesive. Safe, non-toxic and solvent free, dries clear and is washable. Can be used on a variety of projects and permanently bonds fabric, textiles, synthetic materials, glass, and so much more.
Supertite Fusion Tackis a great glue for Fabrics, plastics, metals and more!
INDUSTRIAL STRENGTH! Solvent Free! ACMI AP Approved for kid use. Supertite Fusion-Tack Adhesive is an industrial strength textile adhesive. Safe & Non-Toxic, it dries transparent and is washable, permeable and permanent.
BONDS: Fabrics, Crystals, Textiles, Synthetic materials, some Leather and Embellishment Projects! Recommended for hemming and Sewing clothes and textiles.
KEY NOTES: KEEP FROM FREEZING. Not to be used on items to be heated or submerged. Do not Dry Clean. Allow 3-5 days before washing. Wash hands with soap and water after use
Crystal Katana Black Edition with case
A$52.00
Sold out
If you are a serious crystal embellisher then this is the tool for you! This highly renowned tool is used around the world and is regarded one of the best tools to use for crystal embellishment. This patented tool can also be used for many other things such as model craft building, scrapbooking or even nail art.
The wax tip is very long lasting and when you eventually wear it down replacement tips can be purchased.
You are purchasing 1 black crystal katana tool and a clear case for storage.
Wax pencil
A$2.00
Wax pencil used to pick up rhinestones, best used for small stones, easy to sharpen. 1 piece
Syringe screw type
A$0.80 - A$6.00
Sold out
Glue dispensing hand type syringe, it has changeable tips to increase/decrease glue dispersed
Length is 8.5cm (with plunger in) 5ml capacity
This glue syringe is best used with E6000
Note: syringe does not come with tips (buy tips separately)
Syringe Tip
A$0.20 - A$1.60
3 sizes available, all to be used as an attachment to 'syringe screw type'
14Ga- best used for size ss30, ss20, ss16
16Ga- best used for size ss20, ss16, ss12
18Ga- best used for size ss16, ss12, ss10
1oz E6000 Tube Glue
A$12.95
Sold out
• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and much more
• Dries clear
• Photo safe
• Paintable
• Temperature resistant
• Non-flammable once cured
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
2oz E6000 Tube Glue
A$15.95
• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and much more
• Dries clear
• Photo safe
• Paintable
• Temperature resistant
• Non-flammable once cured
Follow these step-by-step directions when using E6000 Craft:
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
Fabri Fuse 2oz with Precision Tip
A$17.50
Sold out
• Great for projects using fabric, felt, metal, wood, glass, rubber and much more
• Dries clear
• Acid-Free
• Washable
• Low Odor
Follow these step-by-step directions when using Fabri-Fuse:
1. Remove inner seal on bottle.
2. Apply directly to each surface to be bonded.
3. Mate surfaces.
4. Dry flat for at least 8 hours.
5. Washable after 72 hours.
E6000 0.5oz Tube
A$9.00
Sold out
• Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric and much more
• Dries clear
• Photo safe
• Paintable
• Temperature resistant
• Non-flammable once cured
Liquid Fusion Glue 2oz
A$19.00
A very versatile glue that can be used on a variety of surfaces including wood, metal, fabric, stone, fibreglass, laminate and more.
For use indoor and outdoor
Works best on porous non oily surfaces.
UV resistant for those outdoor projects
This glue is also NON-TOXIC, it has a runny and smooth consistency so a bottle goes a very long way.
Best used with syringe tips or straight from the bottle.
Also dries clear
I personally have been using this glue non stop for the past year on all of my drinkbottles and coffee cups (all metal) and this product has very much impressed me. Also great for outdoor projects (i think of a car emblem) and the best part it is NON-TOXIC!! It doesnt have a bad odour and isnt sticky and a bottle goes a very long way!!
Shaker tray
A$3.50
Sold out
Perfect for flipping over your stones with just a gentle shake which can speed up your crysalling time. It also has a funnel which is great for when you are finished you can easily pour your stones back.